I need to fill this gap in this fingerboard. Using dust and CA leaves a much darker area than the natural bloodwood....
Any sugestions?
Thanks
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Help filling a gap http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=8757 |
Page 1 of 1 |
| Author: | peterm [ Mon Oct 09, 2006 4:40 am ] |
| Post subject: | |
I need to fill this gap in this fingerboard. Using dust and CA leaves a much darker area than the natural bloodwood.... Any sugestions? Thanks
|
|
| Author: | A Peebels [ Mon Oct 09, 2006 4:46 am ] |
| Post subject: | |
I'm thinking mabe loosen the binding to the right of the gap, shorten it slightly then reglue. Just a thought. Al |
|
| Author: | Michael Dale Payne [ Mon Oct 09, 2006 6:32 am ] |
| Post subject: | |
If you don't want to reglue the joint, then take planed off curls of bloodwood to fill it. pretty simple and will be near invisible |
|
| Author: | peterm [ Mon Oct 09, 2006 9:18 am ] |
| Post subject: | |
Thanks Michael.. thats what I had in mind and I guess that may be the best solution. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|